How To Run Windows 10 From USB Drive

I am  here to guide you How To Run Windows 10 From USB Drive and to explore out this feature. 

Step 1 - Check the speed of your USB stick

To measure the speed of your stick I recommend HD Tune. It provides data regarding the data transfer rate and the access time. The most important is the access time. Ideally it should be under 1ms. I use this stick. Note the data transfer time (red) comparable to a HDD and the access time (green) of 0.3ms close to a SSD which is appr. 50 times faster than the access time on a HDD.

 

Step 2 download and install the cool tool WintoUSB

1. First of all you need to download and install the cool tool WintoUSB, the tool that will allow you install ISO file over the USB drive to run on your computer.
 Also learn how to make bootable pendrive without any software

2. After downloading run and install this tool in your computer.

3. Now launch the tool after installing it and you will see interface like below.

4. Now you need is the ISO file of the Windows 10 and for that you can get the file from Here.

5. Now in the tool select the ISO file that you had downloaded.

6. Now when you select the ISO file just select the operating system from the list that you want to install virtually on the USB.

7. Now the installation process will start and this will take some time to be patient and let the process complete.

8. Thats it you are done, now you have portable windows installed on the USB drive that you can directly run by inserting pendrive in PC and starting this OS.

Hope you like this do share with others too. Leave a comment below if you still have any related queries with this.

Have fun and enjoy